Welcome to Shanghai Dongda Polyurethane Co,. Ltd.

Rigid Polyurethane Blend Polyols for Coolers DJD-101S

DJD-101S

[Description: ]

DJD-101S blend polyols use water  as blowing agent which applies to coolers,barrel insulation and other insulation products. The characteristics of the products are as follows

  • Product Detailson
  • parameters
  • Installation video
  • download
1.excellent flowabilitythe density of the foam is well-distributed and the thermal conductivity is low
2.excellent low-temperature dimensional stability and good cohesiveness;

Physical Properties

Appearance light yellow transparent  liquid
Hydroxyl Value mgKOH/g 300-400
Dynamic Viscosity (25℃) mPa.s 600-700
Gravity (20℃) g/ml 1.05-1.10
Storage Temperature ℃ 10-30
Storage Stability month 6

Recommended Ratio

  pbw
DJD-101S blend polyols 100
   
Isocyanate 120-130

Technology and Reactivity(the exact value varied depending on processing conditions)

  Manual Mixing Mechanical Foaming
Raw Material Temperature ℃ 20-25 20-25
Mould Temperature ℃ 35-40 35-40
CTs 13-15 12-13
GTs 70-80 50-60
TFTs 100-120 70-100
Free Density kg/m3 25-26 24-25

Foam Performances

Foam Density by Molding GB/T 6343 ≥38kg/m3
Closed-cell Rate GB/T 10799 ≥90%
Thermal Conductivity (15℃) GB/T 3399 ≤25.5 mW/(m.K)
Compressive strength    
(perpendicular to the direction of rising) GB/T 8813 ≥150kPa
Dimensional Stability (24h -20℃) GB/T 8811 ≤1.0%
(24h 100℃)   ≤1.0%
The data provided above are typical value which are tested by our company. For our company's products the data included in the law do not have any constraints. 

Apply to be a dealerIf you are interested in our products, please fill out the form below, we will contact you within 24 hours!

Try a new code

Factory Website