Pure polyurea systems for spray coating DSPU-601

DSPU-601 is two-component polyurea spray type combination,which is used in a variety of base material protection.

  • Product Introduction

    DSPU-601 is two-component polyurea spray type combination,which is used in a variety of ba

    se material protection.
    100% solid content no solvents no volatile little or no odor strictly comply with the VOC limit standard belongs to
    the environmentally friendly materials.
    Product packaging
    200kg /drum


    B component (isocyanate) is moisture sensitive. Unused raw materials should be stored in a sealed drum
    avoid moisture intrusion .A component (polyether) should stir well before use.
    Potential hazards
    Part B (isocyanates) stimulate the  eye respiratory and skin  through breathing and skin contact and possibly sensitization.
    When contact part B ( isocyanates) necessary preventive measures should be taken according to material
    safety date sheet (MSDS) .

    Waste disposal

    With reference to the material safety date sheet (MSDS) of the product or deal with it  in accordance with local
    laws and regulations.

  • Physical Properties

    Item Unit Polyether component Isocyanate component
    Appearance    viscous liquid  viscous liquid
    Density(20℃) g/cm3 1.03±0.03 1.08±0.03
    Dynamic Viscosity(25℃) mPa·s 800±200 800±200
    shelf life month 6 6
    Storage Temperature 20-30 20-30

    Proposal of process

      Unit Value Test Methods
    Mix ratio By weight 1:1.1(A:B)  
    GT s 5-10 GB/T 23446
    Surface dry time s 20-30
    Temperature of material
    -part A
    -part B

    Pressure of material
    -Part A
    -Part B

    Physical  Properties of  Finished  Product

      DSPU-601 Unit Test Methods
    Hardness 80 Shore A GB/T 531.1
     Tensile Strength ≥16 MPa GB/T 16777
    Elongation at break ≥450 %
    Tear strength ≥50 N/mm GB/T 529
    impervious 0.4MP 2h   GB/T 16777
    Bibulous rate ≤5 % GB/T 23446
    solid content 100 % GB/T 16777
    Adhesive strength dry base material ≥2 MPa

    The data provided above are typical value which are tested by our company. For our company's products
    the data included in the law do not have any constraints.

If you are interested in our products, please fill out the form below, we will contact you within 24 hours!

Apply To Be A Dealer




Address: No.307,Shanning Road,Shanyang Town,Jinshan District,Shanghai,China.

Fax: +86 21 3369 1934